High and low temperature integrated machine manufacturers tell you to start the preparation matters

Time:

2020-10-23

Source:

www.jinghuayiqi.com

Author:

京华仪器

High and low temperature integrated machine Before we use the high and low temperature integrated machine, we must do a good job in preliminary preparations so that the equipment can operate well and stably. But many friends may not know how to do these preparations, so I will give you a detailed introduction below.

1. When transporting the equipment, be sure to keep the body vertically upward. The equipment must be placed horizontally, and ensure that there is enough flowing air on the ventilation surface so that the high-temperature gases discharged can quickly disperse and improve the cooling efficiency. .

2. Check the connection between the inlet and outlet of the circulation system of the high and low temperature integrated machine and other equipment to ensure that the connection is secure and that there are no obstructions within 70cm around the equipment.

3. There should be no flammable or explosive objects around the equipment security location, and it should be installed on the surface of insulated objects to ensure the safety of the equipment when operating at high temperatures.

4. Keep the environment around the instrument clean and sanitary, and clean the inside of the equipment regularly to avoid excessive dust accumulation that affects the efficiency of the equipment.

5. Place some materials that can absorb the heat-conducting medium at the bottom of the equipment to prevent the heat-conducting medium from leaking or overflowing. If there is any spillage, be sure to clean it up in time.

6. When installing a large high and low temperature all-in-one machine, you must consider whether the ground strength at the installation location can withstand the operation of the equipment.

Real-time information

■

The practical application of high and low temperature cycling machine and common experimental equipment supporting

—

2021-07-01